size
Supplied on a black 10m coil. 5 or 10mm thick with varying widths.
A self adhesive EPDM resilient foam rubber acoustic sealing tape for decoupling timber and steel stud from surrounding surfaces. Also useful to decouple timber floors from joists and concrete floors.
A self adhesive EPDM resilient foam rubber acoustic sealing tape. This product is designed for isolating and cushioning stud walls or battens when applied directly to a wall. The acoustic sealing tape is age resistant and chemically neutral against most commonly used lacquers and plastics. These EPDM acoustic strips are resistant to most caustic chemicals, ozone, moisture and UV radiation.
Available as black 5 or 10mm thick / 10m length coils with a self adhesive backing but can produce non self adhesive and alternative thicknesses and widths depending on quantity required.
Widths stocked are between 10mm - 100mm as standard in 5 and 10mm thicknesses.
Subject to a minimum order we can also supply other types of rubber sheeting or coils. Please call our technical team on 0845 363 7131 with any enquiry.
When using timber in the construction of a new isolated stud wall we would always recommend sitting the stud on 10mm thick acoustic strip as outlined in the graphic below.
By sandwiching the acoustic sealing tape between the stud and the floor and surrounding walls and ceiling you create a much more isolated system. This in term dramatically reduces any vibration and flanking noise being transmitted into and from adjoining rooms or properties.
The acoustic sealing tape does not replace the need for decoupling the wall with the Resilient Bar but does help greatly increase the walls performance against low frequency bass vibration and loud noise.
PLEASE NOTE: THIS PRODUCT ONLY REDUCES AIRBORNE SOUND TRANSMITTED THROUGH WALLS WHEN USED IN CONJUNCTION WITH OTHER SOUND CONTROL MATERIALS!
